Change location 

Course Length Format
Select an option
Cisco MDS 9000 Configuration and Operations (MDSCO) v4.2 3 days Lecture/lab
Course outline

Lesson 1: MDS 9000 Platform Components and Architecture

  • SMB and Enterprise SAN Requirements and Consolidation Methods
  • The MDS 9000 Virtual SAN
  • The MDS 9000 Platform
  • The MDS 9000 Modules
  • Crossbar and Supervisor Module Architecture
  • MDS Switching Module Architectures
  • MDS Switching Module Oversubscription

Lesson 2: Intelligent Fabric Services

  • MDS Intelligent Services Modules
  • FAIS Overview
  • SANTap
  • SAN Virtualization
  • Protocol Acceleration
  • Security
  • Cisco MDS 9000 MDS 9000 FICON Support

Lesson 3: Initial Setup, Fabric Manager, CLI

  • Performing the Initial Setup
  • Cisco Fabric Manager Server
  • Cisco Fabric Manager
  • The Command Line Interface

Lesson 4: Licensing, Software Upgrade, Troubleshooting the Boot Process

  • Software Licensing
  • Software Installation and Upgrade Prerequisites
  • Software Upgrade Methods
  • Troubleshooting the Boot Process

Lesson 5: Configuring Cisco Fabric Services

  • Cisco Fabric Services
  • Cisco Fabric Services Architecture
  • Cisco Fabric Services Implementation
  • CFS Distribution over IP
  • Call Home Services
  • Configuring Call Home
  • Customized Alert Group Messages
  • Configuring NTP

Lesson 6: Fibre Channel Protocol Addressing

  • Fibre Channel Layers
  • Fibre Channel Addressing
  • World Wide Names
  • Fibre Channel Routing
  • The Registered State Change Notification Process

Lesson 7: VSAN Configuration and Domain Management

  • VSAN Overview
  • Creating VSANs
  • Domain ID Assignment
  • The Fabric Configuration Server
  • Configuring the Principal Switch priority
  • FCID Assignment
  • N-Port Virtualizer and N_Port Identifier Virtualization
  • Dynamic Port VSAN Membership

Lesson 8: Configuring Interfaces

  • Configuring Fibre Channel Interfaces
  • Trunk Mode Configuration
  • Port Bandwidth Reservation

Lesson 9: FSPF and PortChannels

  • Implementing Traffic Engineering
  • Configuring Load Balancing
  • PortChannel Overview
  • Creating PortChannels
  • The PortChannel Protocol
  • Modifying PortChannel Links

Lesson 10: Implementing Zones

  • Zoning Overview
  • Creating Zones and Zonesets
  • Verifying Zone Configuration
  • Configuring Zoneset Distribution
  • Recovering from Zone Merge Failures
  • Managing Zonesets
  • Enhanced Zoning Features
  • Recommended Practices for Zoning

Lesson 11: Basic Troubleshooting

  • Troubleshooting Methodology
  • Verify Power
  • Monitoring Ports
  • Verifying Fabric Registration
  • Cisco Fabric Manager Tools
  • Using FC Ping and FC Trace
  • Monitoring Processes and CPUs
  • FCIP Troubleshooting
  • Troubleshooting Network Connectivity
  • Verify FCIP Configuration
  • SPAN / RSPAN Overview
Course labs

Lab 1: MDS 9000 Initial Setup
Lab 2: Troubleshooting the Boot Process
Lab 3: Configuring CFS and Call Home
Lab 4: Configuring VSANs
Lab 5: Configuring Interfaces and Port Tracking
Lab 6: Configuring Device Aliases and Zoning
Lab 7: Configuring PortChannels and FSPF
Lab 8: Challenge Lab (Optional)


CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, Cisco IOS, Cisco Systems, the Cisco Systems logo, and Networking Academy are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. All other trademarks mentioned in this document or Web site are the property of their respective owners.